7TV Apocalypse Vehicles – Interceptor and The Compact Pussycat

More work on the post-apocalyptic motor pool as I prepare for my first full game of 7TV Apocalypse.

Never one to start one new project, when I could do two in parallel, I’ve embarked on building the Crooked Dice V8 Interceptor resin kit and also a conversion of a die cast toy.  The latter is going to be the wheels for my PA ‘Penelope Pitstop’ figure which along with the Interceptor I picked up as part of the recent Kickstarter.

PA cars 1

The (second to) last of the V8 Interceptors

So first off the Interceptor kit.  I originally got hold of one of these when they were released last year and made sure I included another in my Kickstarter pledge.  This is a really nice, crisply cast resin model with loads of accessories.  Taking it’s inspiration from the Mad Max films, the extra bits and pieces allow it to be built in a number of configurations.

I had previously built and painted this as a ‘Main Force Patrol’ police pursuit car from the original Mad Max.  Looking back I wasn’t too keen on paint job I’d done, so the chance to built another one and make a better fist of it wasn’t to be passed up.

I’ve decided to go with a much more wastelands ‘last of the V8s’ look for this one, with the addition of the massive rear shield (which puts me in mind of the Death Race remakes of recent years).

V8 1
All the bits for the build (leaving plenty left over)

Following a soak in warm soapy water and using pound shop superglue the pieces went together really well (with minimal clean up required).  I was also left with plenty of accessories left over to use on other kits and conversions.

V8 2
Flipping the chassis over to attach the exhausts shows just what an amazingly clean cast the kit is
V8 3
Exhausts attached
V8 4
Bonnet and air intake / super charger (I think, I’m not really a car person)!
V8 5
Wheels attached – I’d attached one of the exhausts too far down the chassis, so one of the rear wheels needed some ‘persuasion’ to put into place
V8 6
Ready to attach the bonnet – the engine enclose contains sculpted detail in case you wanted to leave it open (just one of the nice touches on this kit)
V8 7
Finished kit ready for painting (bumper and rear shield in place)
V8 8
That rear shield should afford some protection out on the roads!

The Compact Pussycat (with claws)

Despite having a huge pile of figures to paint up from the Kickstarter all of which are excellent, there are a couple that stuck out that I really wanted to get to the top of the queue. One of these was the aforementioned Penny.  Now of course, Penny needs a ride for the ‘wacky wasteland races’, so off the the big pile of unused Teamsterz cars it was then.

CP 1
Teamsterz Street Machine (approximately 1/43 scale) with conversion bits from Crooked Dice

Using some of the left over Interceptor bits and bits from the stowage set I’ve come up with my own interpretation of the ‘Compact Pussycat’ (only this time with guns)!

CP 2
The guns were left over from the Interceptor kit.  Glued together as a twin linked set.
CP 3
The pimped up ride, ready for paint
CP 4
Bull bars adding a bit of grunt!
CP 6
Stowage bits from Crooked Dice

Paint job has yet to be finalised, and as I have now got the full boxed set of rules through for 7TV Apocalypse I shall also be shortly stating up this motor.

You can purchase the Interceptor kit directly from Crooked Dice, where you will also find the stowage sets and loads of other PA goodies for the tabletop.

You can find Teamsterz (sometimes called Roadsterz) in various discount stores and toy shops up and down the UK.

More soon…..

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s