Much of my recent hobby activity has been around the modelling and painting of 28mm scale post apocalypse figures and vehicles. This was inspired by my involvement in the beta testing of 7TV Apocalypse which is now coming towards it’s conclusion on Kickstarter.
Currently over three times funded, but with plenty of good stuff still to be unlocked I’d heartily recommend backing this (if not so we can please unlock the Alien Invaders (‘Visitors’).
The campaign is running until 9pm (GMT) on Tuesday 6th November.
I’ve been doing this Action Force in 28mm thing for a few years now. I keep getting distracted, but always get pulled back in. I blogged recently about the ultimate goal of getting a Roboskull to the table, but this reminded me I have a number of part finished other vehicles to add to the motor pool. So with a concerted effort I have gone back and revisited these.
Most of the vehicles I have previously started have been for the ‘Enemy’. I’ve kind of handled this in a couple of different ways – both accurate replicas of the toys/comics and an ‘inspired by’ approach.
The latter has basically involved me finding models and toys (in the right scale) that kind of fit the setting. For Action Force themselves this could be standard military type kit such as land rovers or tanks (concentrating on the eighties period), but for the Red Shadows I’ve thought a bit wider. So this has led to some interesting choices and conversions. Presented below are a couple of the more wild ideas I have completed, including a flying saucer and a ‘Dust 1947’ plane.
I’ve also recently gone down the ‘walker’/’mech’ route as well, utilising a Konflikt 47 resin/metal model kit from Warlord Games. A head swap for the pilot and voila – the Red Spider!
Going further back to the German World War II inspiration for the Enemy, many years ago I picked up a Tamiya 1:48 scale Sdkfz.69. I’ve recently gone back and finished this, with the idea that this could represent the ubiquitous Shadowtrak.
And this brings me back to the other of the two top level options – accurate replicas of the toys in 28mm scale. The obvious route to go down here is 3D printing – more about this later. However there is at least one off the shelf option that is (relatively) widely available.
This is a novelty gift pack / toy by Running Press – the sort of thing you normally see for sale in stands next to checkouts in bookshops alongside Harry Potter wands or small TARDIS or Dalek models. This particular item represents a Cobra HISS tank, better known to Action Force aficionados as the Enemy (and later Cobra) Hyena. The scale is pretty much spot on for 28mm scale.
This is also sometimes available from third party sellers on Amazon, and that is where a few years ago I picked up half a dozen of these bad boys. Out of the box it is coloured black and comes with a set of Cobra stickers to apply as well as an information booklet. It also has sound! Press a button on the turret and you get a slightly cartoony laser gun sound – totally unnecessary, but totally amazing.
I’ve painted these in a slightly different way than usually. As the base model is black, I wanted the main body to be red, but also wanted to leave a lot of the detail untouched (including the clear canopy in case I ever wanted to add a driver); I’ve gone down the Gundam marker route…..
Gundam markers are named for and used almost exclusively in the Gunpla (Gundam kit building) community. They come in various types ranging from large nibbed pens that apply enamel paint on application of pressure to fine tipped markers which are used for panel lining. I’ve found these to be an interesting addition to my hobby toolkit.
For the Hyena I used a thick nibbed paint pen to apply a base coat of red (leaving some of the recesses black where appropriate). Once dry (which takes a while longer for enamels) I drybrushed a light red acrylic over this to apply both a highlight and to dull down the shininess of the enamel base coat. The markings were applied with a thinner nibbed marker.
So, the elephant in the room then? Yes 3D printing. I still covet a printer of my own, but in the meantime and for those like me bereft of the hardware there are still plenty of options. There are a surprising number of 3D models of GI Joe vehicles out there (just search on Shapeways or Thingiverse). I have in the past both ordered a printed model from the former, but more recently have been able to get some files printed out by a friend.
Currently on my workbench are these two beauties – a Red Shadows Laser Exterminator (aka a GI Joe HAL) and an SAS Panther jeep (aka a Cobra Stinger). I’m going to do a detailed prep, build and painting guide on these in a future blog.
Where things are a little lacking in availability of 3D models on line is in those Action Force vehicles that weren’t based on existing GI Joe toys back in the day. What that does mean is that there is in particular a big Shadowtrak and Roboskull shaped hole in the Baron’s armoury.
I’d got to the point of having assembled the resin beast and through copies use of greenstuff and a bit of boiling water got the build to the point at which I was ready to get some paint down.
Initial undercoat using Modelmates White Primer
Basecoated using Plastic Soldier Panzer Grey
First off, I’d made a decision to go ‘German Weird World War’ rather than ‘Grimdark Future’ in terms of theme. However rather than go with the classic late war yellow / camo look of the immediate post war timelines of things like Dust and Konflikt 47, I decided to go with a more science fiction / modern camo look. Originally I was planning on using some splinter style camo templates from Anarchy Models, but upon inspection these looked a bit too small. In the end I decided on a light grey/dark grey angular camo pattern using masking tape to mark the pattern out. Using a Panzer Grey spray from Plastic Soldier Company over a white undercoat, the masking was applied and a light grey then applied (Humbrol).
Masking in progress
All over spray of Humbrol Grey
Once dry I tackled the tracks, using a Reaper Miniatures Charred Brown mixed with a few drops of Valejo Glaze Medium to help thin. This was then followed with a silver drybrush using Army Painter Plate Mail.
A dark brown (mixed with a couple of drops of glaze medium) was brushed onto the tracks, prior to a silver drybrush
I decided to tackle decals next (prior to weathering). Decals were sourced from my decals spares box. Most of these were Dust Tactics Axis decals.
Weathering was achieved by applying an all over brush on of Army Painter Quickshade Dark. Once dry chipping was applied using a bit of old sponge, first using a dark brown and then a silver, concentrating on the edges and areas that would be subject to the most wear. Finally (and as an experiment) I applied a bit of Modelmates engine oil around some of the grills and as vertical streaks on the side panels. Final steps were to dull down the Quickshade using an all over spray of Testors Dullcote.
All in all I pretty pleased with the outcome. I haven’t really got a game lined up for this, but I imagine this might be appearing in a ‘moon Nazis’ scenario in 7TV as a centrepiece or objective.
I’ve still got a couple more vehicles to finish off from the Kickstarter and the troops I’ve got are ear marked for Imperial Guard proxies for Kill Team (not a game I have tried yet, but something my gaming group is starting to get into).
One of the most unique and recognisable toys from the second wave ‘Baron Ironblood’ era of Action Force was the Roboskull. One of the last vehicles to be released prior to the switch over to repackaged GI Joe figures, this was an amazing piece of kit (and something as a kid I never had, but coveted intensely).
Back in the world of 28mm scale wargaming, I have recently blogged about the expansion of my Space Force ‘cast’ for 7TV. These guys really need something to go up against in games, something outer space based…., something robotic….., something skeletal.
When looking at vehicles for the project so far I have tended to concentrate on converting existing model kits or die-casts, and have dipped my toe a bit into 3D printing as well (more on that in a later post). However getting hold of something to represent what is a very strikingly unique vehicle as the Roboskull was proving challenging. I had thought that this might have to wait until I was able to invest some money and time into getting into the 3D printing hobby myself, or trawling through Thingiverse for someone who might have had a similar idea. Then I thought back to a Heroclix model I remember stocking when I ran a games shop. A quick ‘popular auction site’ search and behold a few days later in the post….
This is a Heroclix ‘Brainiac Skull Ship’ and it’s going to need a fair bit of work to get it into shape. The basis for a Roboskull is there though and it’s going to be an interesting ride. Plasticard, hobby saw and bits box at the ready!
(For more info on the Roboskull check out the excellent Blood for the Baron website, and also the video below which is a great documentary by Analog Toys on the production of the memorable original.)
Many years before Space Force was a real actual thing (maybe), they were the eyes and ears of Action Force monitoring the skies and protecting the Earth from afar from the evil machinations of Ironblood.
Along with Q Force (the underwater team), I think it is fair to say that they were not quite as popular as their ground based infantry comrades in Z Force and the SAS. Part of it was down to the more limited range of toys available and the fact that they didn’t feature as much as other teams in the comic strips.
In fact the overt sci-fi stylings of Space Force did seem to clash a bit with the modern militaristic feel of the rest of the range. It was not actually towards the end of this era of Action Force toys that the Red Shadows had anything ‘space-related’ to field against them, with the awesome Roboskull.
A couple of years ago I picked up the excellent ‘not Space Force’ miniatures from the Woodbine Design Company (part of Gripping Beast) and as part of this very long running project have just started to think about vehicles and transport for them.
Rather than go down the ‘spaceship’ route I’ve tried to mix the militaristic with near future sci-fi and have started to paint up a vintage IMAI model kit of the Shado Mobile from Gerry Anderson’s UFO.
Initially undercoated using an Army Painter Wolf Grey spray can. I have so far gone through and added some additional darker blue to match the general livery of Space Force vehicles from the toy range; as well as blocking out colour on the tracks and wheels.
The ‘Action Force’ logo sticker is from a reproduction set scaled for the toys. Next step will be adding some Space Force logos (which I will freehand) and some weathering. My target game system for this is of course 7TV!
Earlier in the year I got really invested in Legion, the tabletop miniatures game in the Star Wars universe, published by Fantasy Flight Games. Having spent some time assembling and painting minis, I immediately got distracted (as all good hobby butterflys do) by terrain and re-utilising old toys for the tabletop. A couple of vintage Kenner / Palitory AT-ATs were purchased from eBay (and then resold as I say sense), as were some Rebel Transports, a U-Wing and various other bits and pieces.
Then as often happens I just didn’t get to play the game. I had a learning game with my good friend and gaming compadre, Mr.Hawkins, back in the Spring and then nothing. This was partly due to the distraction of other shiny things, and partly because my best chance of getting a game was at my local club. Due to other commitments I wasn’t able to get down and I missed most of the monthly meetings over the summer.
However this last Sunday I was finally able to Legion to the tabletop for a couple of games at Matlock and Dales WRG (at the request of another member who similarly had sat on the game for quite a while without actually playing).
MDF Shield generators by TTCombat
Game was played on a 6 by 4 table
My heroes – The Rebel Fleet Troopers
Spot the recycled old toy
Snowtroopers in entirely the wrong choice of coats
Captain Antilles about to be ambushed
I’m no good at reviews, but will say this (and have said so before); it’s a good game. A very good game. Bearing striking similarities to other Star Wars games in the Fantasy Flight catalogue (lots of tokens and cards, custom dice, the ‘surge’ mechanic), it seems to have ironed out some of the inconsistencies and clunkiness of games like Armada and Imperial Assault. Adding to the mix an alternative unit activation mechanic and innovative and intuitive command and control element, this puts it above many similar games I have had experience of in the past. My opponent and I did get quite a few things wrong in the early rounds, but this wasn’t really noticed and didn’t interupt the cinematic flow of the game (I was making a lot of ‘pew pew’ sound effects in my head).
The second game of the day was played on a smaller mat with no vehicles (due to time)
Paper mat courtesy of the Doctor Who Exterminate Miniatures Game
In getting ready for the game I wanted to just share a couple of hints and tips, both on the painting and army construction side of things.
While I had got at least a basecoat down on most of my miniatures (the contents of two core boxes and a handful of expansions), there were a few I had not yet touched. It wouldn’t be realistic to get everthing done in time for the game (real life is quite hectic at the moment), but I at least wanted to be avoid playing with any completely unpainted models.
Therefore I concentrated on detailing up all the Imperial Stormtroopers I had previously undercoated white, adding in some basic detail and making them tabletop ready (with the intention of going back and finishing them off to a higher standard later). Here, the humble toothpick was my friend. Rather than rely on a brush and a steady hand to pick out the black details on helmets and armour and to minimise the chances of despoling that trademark white with any overbrushing I found toothpicks gave me the control and steadyness I needed (but maybe not the patience!). This was particularly useful when doing helmet eye lenses and something I will try out for painting eyes in general moving forward.
My next job was to paint up the only fully unpainted squad I had not yet tackled, the Rebel Fleet Troopers. These are the guys who valiantly get slaughtered by Darth Vader at the begining of the very first Star Wars film (and of course we now know this fight continued on from the end of Rogue One). As figures go, I think these are some of the nicest that have been released so far. Very characterful sculpts and true to the films. I’d picked these guys up at UK Games Expo back in June, assembled them and then, well, got distracted…
Taking a very methodical approach I blocked out each colour (having applied a grey undercoat). Following a production line approach of doing all of one colour across the squad before returning to the first and adding the next hue I was able to get these guys done in only a couple of hours. I left the dark grey undercoat showing through for the mainly black coloured vests and let Army Painter washes do the rest.
Building up basic block colours over a dark grey undercoat
Guest appearence from Princess Leia (she didn’t get finished for the game)
The squad leader is based on Captain Antilles from the film and follows a different scheme. The intention with these is that I will go back and do some proper basing and highlighting at a later date.
I have to say I’m not a huge fan of painting armies or even squads (I much prefer to do more individual character models): however the fact I was actually going to able to field these in a game was a real motivator.
Pre-wash and tidy up
Wash and basic base colouring done. Highlighting and basing to be completed at a later date
The Rebel Fleet Troopers proved to be a really solid choice in play (and are my new favourites), having almost taken down Vader in the first game. Some form of sweet revenge for their on screen performance perhaps?
I also just wanted to give a quick mention to the Tabletop Admiral online army building application for Legion. I used this to quickly knock up the forces the night before the game allowing me to sort out cards, tokens and minis quickly beforehand and enabling us to setup quickly on the day. If you are a player of Imperial Assault or Runewars this also might be of interest to you.
I recently received my pledge rewards from the Empire of Men Kickstarter campaign by Archon Studio. The campaign was to fund production of a range of resin miniatures and vehicles, that although rules agnostic were clearly aimed at players of ‘grim dark’ games of the far future.
I was particularly attracted to this for the Weird World War look of some of the figures and vehicles. The background fluff for the setting is based around a Great War that never ended, and many of the vehicles on offer have a distinctly German feel to them.
Without a particular game system in mind and due to limited funds I went for a small selection of troops and a few vehicles; figuring that I would enjoy the modelling and also falling back on my usual approach of ‘it’ll probably work for 7TV‘ (a ‘Moon Reich’ perhaps?)
So what did I get? In addition to a handful of ‘stormtrooper’ troops I picked up the follow:
Reaper – a Horton style flying wing aircraft
Stalhratte Mk.1 – a super heavy tank that seems to draw it’s influences from the prototype World War II German Maus
Wolverine – a transport / medium tank option (probably the most 40k like of the lot)
First impressions on receiving delivery was that the casts were quite clean (particularly on the figures). The grey resin is lightweight and looked easy to work with. It looks and feels more like plastic, is soft (but not too soft) and not at all brittle.
The part count for the vehicles is quite low, meaning in particular for the Stahlratte there are some quite chunky pieces of resin. Once unboxed and gave the parts a good wash in hot soapy water to remove casting residue and make then easier to assemble.
Vehicle parts washed
Two Stormtrooper squads ready for assembly
So, I really couldn’t resist assembling the big fella first. All the parts seemed to come with peg joints and inserts, so theoretically it should be possible to do a dry fit before assembly. After an initial clean up primarily around the joints and edges to remove casting vents I attempted to ‘clip’ the Stahlratte together. It immediately became apparent that some of the parts were warped to some degree, so of course (as always when working with resin) having to boiling water to hand to soften and reshape was a must. Many of the issues were with the small peg joints so I found imersing these in water to make more malleable and ‘clipping’ together while still soft was the way to go. At this point I also decided to glue pieces in place as I got a good fit (using superglue and activator).
At this point things were beginning to take shape, but it was becoming apparent that a LOT of work would be needed to fill the gaps.
A generous application of green stuff and voila an almost completed Stahlratte Mk.1
Smoothing the turrent join
Filling a hole
Even more Greenstuff!
All that remained was tho straighten up some of the gun barrels and attached to the turret. I’ve decided to keep the turret and hull seperate for painting, so the pictures show one just delicately balanced on the other for the time being.
Hull and turret assembly
All in all I really enjoyed putting this together. It was more work than I originally expected when opening the box, but I think that is to be expected when working with resin (especially considering the budget price point). If anything I found the gap filling quite cathartic!