Return to the Wastelands

I’ve been recently revisiting my 28mm scale post-apocalypse miniatures. In particular those that have been in a state of semi-completion for some time.

Prior to the current pandemic I had organised a 7TV Apocalypse event at our club, which sadly had to be put on hold. (As an aside we are starting up club meetings again at the end of May after a 14 month hiatus – some actual gaming, can’t wait). Any how as part of the prep for that cancelled event I had continued to work on my 7TV Apocalypse Kickstarter miniatures. In addition since then I have added to the unpainted pile by adding in a whole load of 3D printed models. So plenty to revist.

First up is a vehicle – this has sat 80% done for about the last two years. Based on an Warhammer 40k Ork Wartruck kit I swapped out the greenskin crew with a Crooked Dice ‘vehicle gunner’ and some bits from the old Project Z biker sprue.

The kit I based the conversion on

I had already weathered this bad boy up a fair bit, but I tied it all up with a brush on application of Army Painter Strong Tone Quickshade. Once dry ,a once over with a matt varnish sealed everything together.

Weapons and stowage from various sources – but mainly Crooked Dice

Most of the figures I am painting up for this project at the moment would, I suggest, fit into the category of ‘marauder gangs’. Working up from a white undercoat most of the following were painted up using Citadel contrast paints.

An old Mantic Mars Attacks miniature joins the gang
Bombshell Miniatures (3D print)
Anvil Digital Forge (Anvil Industries 3D print)

To maintain consistency across the ‘gang’ I’ve tried to keep the basing similar, using a dark yellow basecoat followed by a strong tone wash and then a bone drybrush highlight. I’ve used some deep red flock and some wasteland tufts to add some features.

I’ve tried to tie the basing together across these miniatures

A good gang needs an awesome leader and I have a couple to choose from. First up a 3D print from Cyber Forge (Titan Forge Miniatures). QB Turner has a certain resemblance to someone who perhaps might be at home running some sort of dome based gladitorial games. (She also doesn’t need another hero.)

She’s a private dancer

Secondly there is the big fella himself – the humungous one, who for the purposes of my games is henceforth to be referred to as the Lord Beefcake. This is another 3D print, this time from the recent Kickstarter by Kirstie Greyskull of Powersword Miniatures.

3D print (Powersword Miniatures)

(I also have a similar model from Crooked Dice that I am also going to paint up shortly.)

The good guys (if there is such things in the wastelands) don’t miss out totally either. These two are both 3D prints from Cyber Forge again. I particularly like the child who is a sort of mix of the feral kid from Mad Max 2 and Newt from Aliens.

That’s it for the time being, but I have really got the PA bug again, so am continuing to paint up more from the genre from my pile of shame. I’ve also recently picked up a really interesting looking model kit that I think will fit in with these guys really well.