By your command – Galactic Centurions and Imperious Leader

Spiralling out of painting up some of the ‘not-Cylon’ models from the recent 7TV Argonauts Kickstarter I found myself (as often happens) searching the internet for other similar models.

Over on Thingiverse I found a free 3D file for a ‘Galactic Centurion’ designed by ‘BigMrTongue’ (aka Mike Tongue). I liked the look of this and it got me thinking about building a Cylon army/cast for 7TV.

Over on Patreon I discovered that Mike has a page and offers a whole load of variations on this design with lots of poses and variations in weaponry. A quick click later I was signed up and downloading.

I printed these all on my AnyCubic Photon resin printer and was really pleased with the results (despite the odd misprint due to my missing some supports). In general I was able to get a lot printed in one go and in the end finished with around 30 models in various poses.

My intention was to speed paint these and so I settled on spray cans and contrast paints as the chosen method. Undercoating in grey, I then basecoated using a ‘Poundland’ silver car spray. This resulted in a very bright finish – a good match for the highly shiny Cylons from the original Battlestar Galactica.

Black details were picked out in, well…. black! However using Citadel contrast black allowed me to quickly get these done and had the added bonus of letting the underlying metallic basecoat shine through giving a nice robotic look.

The models included a short ‘skirt’ at the back. While in the original TV series I believe these were also black, I fancied added a bit of colour so these were done using a Contrast Blood Angels red. Again with the very bright silver underneath this ended up looking quite metallic, which was quite pleasing.

I went ‘off-piste’ again in terms of screen accuracy with the weapons, choosing a copper from Vallejo to add additional contrast to the rest of the scheme. This was then dulled down with a Contrast paint wash using Astronomicon Grey (which I have found to be hugely effective as a finish for metallics on many different colours).

The most fiddly bit was left until last – the addition of the famous eye scanner. Just a drop of red in this case.

For some variation (and to indicate an officer class perhaps), I decided to paint a handful of the ‘Centurions’ in a gold livery. I cannot honestly remember if gold Cylons appeared in the original series (I have a feeling they may have been in the re-imagined series later on in the run). These were basecoated using a combination of Humbrol acrylic sprays (these can be easily picked up from model shops and shops such as Boyes and Hobbycraft in the UK and I think are oft overlooked as an option for tabletop gaming hobbyists).

My approach here was to lay down a solid ‘Brass’ base and then to a light top down dusting with ‘Gold’. The remaining steps were as per the standard silver troops.

So what about a leader for these robotic menaces? Well it just so happens that over the past few months I have been providing 3D printing services for a new company called Tangent Miniatures. Tangent produce a lovely range of figures in 28mm scale inspired by popular TV series and films that wonderfully slot into 7TV and complement the range from Crooked Dice. So far Wayne at Tangent has produced galactic hitchikers, space fighter heroes and some dimension hopping adventurers and cops. I have had the pleasure of 3D printing the resin masters for all of these and some ranges that are awaiting release in the new year (January). These include some ‘space heroes’ that would fit in really well as enemies for my Galactic Centurions, and also excitingly a ‘supreme imperious leader’ for the shiny robot men.

I’ve painted up one of the masters for the imperious leader, however I felt like he could use an imposing throne from which to order his legions.

So a couple of coke cans and a dip into the bits box later I have this. While in no way exactly the same of the screen version I think this works really nicely. The base I put on the leader fits exactly into the top of the can and I have not glued this so I can use the figure away from this scenery piece in games.

The paint job on the ‘throne column’ was again kept very simple and achieved entirely through the use of spray cans (the weather being kind to me on enough days to get this completed relatively quickly).

So there we are, a legion of Galactic Centurions and their leader, ready to pursue and hunt down the remaining human fleet.

The Robo-Hordes of Argo

I’ve been spending some time recently painting up more of the figures I got as part of the recent Crooked Dice 7TV Argonauts Kickstarter. In addition to the miniatures that I received as part of my pledge I have also been expanding the force with other suitable models from my collection.

For those not in the know, the Kickstarter was to fund a programme guide for 7TV with associated miniatures and profiles to represent the evil Doctor Ulysses Argo and his monstrous robotic creations. As a ode to fantastic and cult TV and cinema of the 1960s and 1970s, the original ‘spy-fi’ version of 7TV has always had a place in my heart. In painting up and modelling this cast for the game I very much wanted to reflect that style of the times, so have gone with a suitably ’70’s beige’ palette.

The majority of my robotic characters would have heavy gold and bronze accents, with my more human types wherever possible sticking to the mustards, yellows and browns from the decade that fashion forgot.

Nowhere is this more pronounced that in my representation of Argo himself. This was mainly painted with thin layers of various contrast paints and tied together with washes.

Following on we have ‘the Nightmare’, a tribute to frankly one of the most terrifying characters and scenes from an 80s movie of my youth – yup computer cyblorg lady from the end of Superman III. I had originally painted her with blue metallic hair but switched this over to a gold to tie it more in with the rest of the cast.

The Argonauts themselves are robots bearing a not disimilar look to a certain race of metallic beings from a 70s (and susequent noughties) space opera TV show. I have painted these up in a more traditional manner befitting the original source material as I am planning on a separate Battlestar Galactica set of casts in future.

Next up are a diversion from the 7TV models to my old favourites the Tehnolog plastic cyborgs (of which these four represent the last I have in my stash). While I had previously experiemented with a purple colour scheme for one, I have done the rest in the ‘team Argo’ colours of gold and silver. My gold technique is achieved using Humbrol spray paints using Brass as a base and then a light top down highlight of Gold. I intend to use these as proxies for the ‘titans’ in the programme guide.

While I am doing the robot thing, I’ve also added a couple of 3D prints from the Titan Forge Miniatures Cyber Forge Patreon, of which I am a member. While nominally for a more ‘cyberpunk’ setting I have again gone for an Argonauts colour scheme here to tie them in with the rest of the team.

One thing I have additionally done here and in other paint jobs for this team is to pull out some spot colours. In particular I like the idea that not all of Argo’s tech is necessarily homegrown and maybe he has had some outside (even alien help) in constructing his robotic hordes. As such I have used some of the Citadel technical gemstone paints to pick out across various models some glowing red, green and blue lights. This is really an ode to the martians from the War of the Worlds and is particularly apt when it comes to the following two centrepieces for the force.

I’ll be going in to more detail about both the Crooked Dice and Bombshell Miniatures tripod models in more detail in an upcoming blog.