7TV Apocalypse Vehicles – Interceptor and The Compact Pussycat

More work on the post-apocalyptic motor pool as I prepare for my first full game of 7TV Apocalypse.

Never one to start one new project, when I could do two in parallel, I’ve embarked on building the Crooked Dice V8 Interceptor resin kit and also a conversion of a die cast toy.  The latter is going to be the wheels for my PA ‘Penelope Pitstop’ figure which along with the Interceptor I picked up as part of the recent Kickstarter.

PA cars 1

The (second to) last of the V8 Interceptors

So first off the Interceptor kit.  I originally got hold of one of these when they were released last year and made sure I included another in my Kickstarter pledge.  This is a really nice, crisply cast resin model with loads of accessories.  Taking it’s inspiration from the Mad Max films, the extra bits and pieces allow it to be built in a number of configurations.

I had previously built and painted this as a ‘Main Force Patrol’ police pursuit car from the original Mad Max.  Looking back I wasn’t too keen on paint job I’d done, so the chance to built another one and make a better fist of it wasn’t to be passed up.

I’ve decided to go with a much more wastelands ‘last of the V8s’ look for this one, with the addition of the massive rear shield (which puts me in mind of the Death Race remakes of recent years).

V8 1
All the bits for the build (leaving plenty left over)

Following a soak in warm soapy water and using pound shop superglue the pieces went together really well (with minimal clean up required).  I was also left with plenty of accessories left over to use on other kits and conversions.

V8 2
Flipping the chassis over to attach the exhausts shows just what an amazingly clean cast the kit is
V8 3
Exhausts attached
V8 4
Bonnet and air intake / super charger (I think, I’m not really a car person)!
V8 5
Wheels attached – I’d attached one of the exhausts too far down the chassis, so one of the rear wheels needed some ‘persuasion’ to put into place
V8 6
Ready to attach the bonnet – the engine enclose contains sculpted detail in case you wanted to leave it open (just one of the nice touches on this kit)
V8 7
Finished kit ready for painting (bumper and rear shield in place)
V8 8
That rear shield should afford some protection out on the roads!

The Compact Pussycat (with claws)

Despite having a huge pile of figures to paint up from the Kickstarter all of which are excellent, there are a couple that stuck out that I really wanted to get to the top of the queue. One of these was the aforementioned Penny.  Now of course, Penny needs a ride for the ‘wacky wasteland races’, so off the the big pile of unused Teamsterz cars it was then.

CP 1
Teamsterz Street Machine (approximately 1/43 scale) with conversion bits from Crooked Dice

Using some of the left over Interceptor bits and bits from the stowage set I’ve come up with my own interpretation of the ‘Compact Pussycat’ (only this time with guns)!

CP 2
The guns were left over from the Interceptor kit.  Glued together as a twin linked set.
CP 3
The pimped up ride, ready for paint
CP 4
Bull bars adding a bit of grunt!
CP 6
Stowage bits from Crooked Dice

Paint job has yet to be finalised, and as I have now got the full boxed set of rules through for 7TV Apocalypse I shall also be shortly stating up this motor.

You can purchase the Interceptor kit directly from Crooked Dice, where you will also find the stowage sets and loads of other PA goodies for the tabletop.

You can find Teamsterz (sometimes called Roadsterz) in various discount stores and toy shops up and down the UK.

More soon…..

Red Shadows Helicopter

I recently picked up an inexpensive die cast toy helicopter and have set about quickly adding it to the ranks of Baron Ironblood’s forces.  This was a relatively quick and easy conversion using as it’s basis a Teamsterz Rescue Helicopter, which cost me about £4.

Taking advantage of the unseasonably good weather I was able to spray this up quickly outside using Halfords Black as a primer followed by an all over of Humbrol Crimson and then a zenith highlight (well a top down spray) of Humbrol Red.

chopper4
Halfords Black primer provides a wonderfully Matt finish when dry

The Humbrol sprays while being acrylics were gloss.  I’d didn’t think this would look too out of place for a chopper, however it ended up being a little too shiny, so this was solved with a once over of Testors Dullcote (which also provided a good base for the details and highlights).

chopper5
Humbrol gloss crimson applied – shiny!
chopper6
Red highlight – even shinier!

The toy had some decent panel lined detail, so I highlighted this using a black marker pen (designed for lining Gundam models).  Windows were painted with Citadel Magragge Blue and tints were applied using a white Gundam marker this time.  Other bits and pieces were painted black or silver and really that was it.

chopper7
Post Dullcote, windows done, awaiting panel lining

It wasn’t until after I had nearly finished that I noticed the screw holes holding the model together on one side.  Had I realised from the start these would have been filled, however as a gaming piece I can live with this.

Final touch was the addition of some decals which I had picked up a few months back on eBay.

chopper12
Decals – originating from a Tattoo studio in the US
chopper10
Survivalist for scale!

There we have it – air transport for the Baron.  Scale is just about OK for 28mm scale miniatures, if anything it is slightly large, but hey, more room for Mutons!

chopper14
Battle Action Force – Operation Bloodhound – helicopter getaway

Next up for the Shad motor pool is an armoured car based on a 1/43rd die cast Puma….

chopper15

Meeples & Miniatures – Episode 256 – View from a Twisted Pinnacle

I was recently given the opportunity to go on the long running Meeples and Miniatures Podcast as a guest presenter.

I talk to regular presenters Mike and Neil about my background in the hobby, current projects and purchases and also spend sometime discussing my experiences of working in the industry.

The episode is now available to download for free from their website (or via your favourite podcasting app). They also have a Patreon account setup up if you feel like donating a few pennies to the upkeep and ongoing production of the show.

Meeples & Miniatures

Download Episode 256

Neil Shuck & Mike Hobbs are joined by a guest presenter in the shape of Patreon backer James Aldridge for this episode of the podcast.

  • 00:00 – Introduction – We chat with James and discover how he got into the hobby and what his favourite games/miniatures are.
  • 21:20 – Confessional – Time to own up to all those hobby purchases we have made recently.
  • 57:55 – Our Hobby – We talk about our recent gaming, including Keyforge, 1066 Tears for Many Mothers and Kill Team. James tells us about his recent trip to Warhammer World whilst Hobbsy reveals all about his adventures at Grogmeet.
  • 1:34:35 – Tales of a Twisted Pinnacle – James tells us his somewhat cautionary tale of his brief foray into the hobby as a retail seller. On a more positive note, he then shares with us his passion for repurposing toys as wargaming…

View original post 82 more words

Toys for Tabletop – Corps Elite Battle Cruiser

I’ve blogged extensively about my project to realise my favorite action figure toys from back in the day, Action Force.  I have a young daughter, but despite not pushing her in any real direction toys, she has gravitated towards traditional girls toys.  Therefore I am not really up-to-speed with boys stuff, and in particular action figures.  So other than knowing that Star Wars is obviously still a thing I’ve no ideal if there is a modern and up-to-date range of military action figures similar to those I used to play with.  However a few weeks back while stocking up on instant noodles during my lunch break in the local discount shop I happened into the toy aisles.  And there I spotted it!

2018-11-10 21.16.32-1
It also has sound!

So this is the Corps Elite Battle Cruiser.  Corps Elite appear to a modern day (but budget version) of Action Force / G.I.Joe, and boy does this one look like it would be perfect for 28mm scale.  As per usual 7TV is never far from my mind when considering these things.

Having succumbed and picked one up, upon initial inspection the vast majority of the components looked like they could easily stay and represent the ‘down-scaled’ versions of themselves.

2018-11-10 23.10.53-1
Straight out of the box

Having opened the box and inspected the ship, the scale looks pretty spot on for 28mm scale minis.  The flat bottom / ‘water line’ means this will look great on the tabletop.

 

There are a few things that will have to be removed and replaced to really hide the larger scale aspects of the thing, namely:

  • The turret and ‘machine gun’ on top of the bridge will be removed and replaced with something more realistic (aerials, radar etc. maybe)
  • The clear plastic ‘fin’ and aerials will need some work
  • The large hatch/doorway molded on the side of the bridge will need hiding

 

Painting wise, it looks like a relatively easy job and will be down to a combination of spray cans and airbrush.  The existing decals were easy to peel off and the entire ‘model’ was given an undercoat of black (using a couple of layers in order to effectively mask the painted on pattern on the hull).

2018-11-11 14.49.18-1

It’s also worth mentioning that I’ve had a bit of a look at the wider Corps Elite range.  While most of the accessories and vehicles are way out of scale for the tabletop, I’ve got to say with a bit of work the ‘Beast Bomber’ could make for an excellent centre piece!

s-l500

Action Force Motor Pool – work in progress

I’ve been doing this Action Force in 28mm thing for a few years now.  I keep getting distracted, but always get pulled back in.  I blogged recently about the ultimate goal of getting a Roboskull to the table, but this reminded me I have a number of part finished other vehicles to add to the motor pool.  So with a concerted effort I have gone back and revisited these.

Most of the vehicles I have previously started have been for the ‘Enemy’.  I’ve kind of handled this in a couple of different ways – both accurate replicas of the toys/comics and an ‘inspired by’  approach.

The latter has basically involved me finding models and toys (in the right scale) that kind of fit the setting.  For Action Force themselves this could be standard military type kit such as land rovers or tanks (concentrating on the eighties period), but for the Red Shadows I’ve thought a bit wider.  So this has led to some interesting choices and conversions.  Presented below are a couple of the more wild ideas I have completed, including a flying saucer and a ‘Dust 1947’ plane.

I’ve also recently gone down the ‘walker’/’mech’ route as well, utilising a Konflikt 47 resin/metal model kit from Warlord Games.  A head swap for the pilot and voila – the Red Spider!

red spider

Going further back to the German World War II inspiration for the Enemy, many years ago I picked up a Tamiya 1:48 scale Sdkfz.69. I’ve recently gone back and finished this, with the idea that this could represent the ubiquitous Shadowtrak.

And this brings me back to the other of the two top level options – accurate replicas of the toys in 28mm scale.  The obvious route to go down here is 3D printing – more about this later.  However there is at least one off the shelf option that is (relatively) widely available.

RNP10012_i

This is a novelty gift pack / toy by Running Press – the sort of thing you normally see for sale in stands next to checkouts in bookshops alongside Harry Potter wands or small TARDIS or Dalek models.  This particular item represents a Cobra HISS tank, better known to Action Force aficionados as the Enemy (and later Cobra) Hyena.  The scale is pretty much spot on for 28mm scale.

d993fe8be08373304903bf8936d40ec0
3D printed Hyena from Shapeways in the foreground, unpainted gift toy version at the back.  28mm scale Red Shadow for scale.

This is also sometimes available from third party sellers on Amazon, and that is where a few years ago I picked up half a dozen of these bad boys.  Out of the box it is coloured black and comes with a set of Cobra stickers to apply as well as an information booklet.  It also has sound!  Press a button on the turret and you get a slightly cartoony laser gun sound – totally unnecessary, but totally amazing.

I’ve painted these in a slightly different way than usually.  As the base model is black, I wanted the main body to be red, but also wanted to leave a lot of the detail untouched (including the clear canopy in case I ever wanted to add a driver); I’ve gone down the Gundam marker route…..

3d560edae50ae117b29ad40e4eb4cd06

Gundam markers are named for and used almost exclusively in the Gunpla (Gundam kit building) community.  They come in various types ranging from large nibbed pens that apply enamel paint on application of pressure to fine tipped markers which are used for panel lining.  I’ve found these to be an interesting addition to my hobby toolkit.

ba354ba59d770397e3d0046fdbf70c04

For the Hyena I used a thick nibbed paint pen to apply a base coat of red (leaving some of the recesses black where appropriate).  Once dry (which takes a while longer for enamels) I drybrushed a light red acrylic over this to apply both a highlight and to dull down the shininess of the enamel base coat.  The markings were applied with a thinner nibbed marker.

hyena

So, the elephant in the room then?  Yes 3D printing.  I still covet a printer of my own, but in the meantime and for those like me bereft of the hardware there are still plenty of options.  There are a surprising number of 3D models of GI Joe vehicles out there (just search on Shapeways or Thingiverse).  I have in the past both ordered a printed model from the former, but more recently have been able to get some files printed out by a friend.

Currently on my workbench are these two beauties – a Red Shadows Laser Exterminator (aka a GI Joe HAL) and an SAS Panther jeep (aka a Cobra Stinger).  I’m going to do a detailed prep, build and painting guide on these in a future blog.

Where things are a little lacking in availability of 3D models on line is in those Action Force vehicles that weren’t based on existing GI Joe toys back in the day.  What that does mean is that there is in particular a big Shadowtrak and Roboskull shaped hole in the Baron’s armoury.

Talking of the Roboskull…..

Empire of Men – To catch a Stahlratte!

I recently blogged about building the epic Stahlratte, a sci-fi style heavy tank in the style of the legendary Maus produced by Archon Studio as part of their Empire of Men Kickstarter.

I’d got to the point of having assembled the resin beast and through copies use of greenstuff and a bit of boiling water got the build to the point at which I was ready to get some paint down.

First off, I’d made a decision to go ‘German Weird World War’ rather than ‘Grimdark Future’ in terms of theme. However rather than go with the classic late war yellow / camo look of the immediate post war timelines of things like Dust and Konflikt 47, I decided to go with a more science fiction / modern camo look. Originally I was planning on using some splinter style camo templates from Anarchy Models, but upon inspection these looked a bit too small. In the end I decided on a light grey/dark grey angular camo pattern using masking tape to mark the pattern out. Using a Panzer Grey spray from Plastic Soldier Company over a white undercoat, the masking was applied and a light grey then applied (Humbrol).

Once dry I tackled the tracks, using a Reaper Miniatures Charred Brown mixed with a few drops of Valejo Glaze Medium to help thin.  This was then followed with a silver drybrush using Army Painter Plate Mail.

I decided to tackle decals next (prior to weathering). Decals were sourced from my decals spares box. Most of these were Dust Tactics Axis decals.

Weathering was achieved by applying an all over brush on of Army Painter Quickshade Dark. Once dry chipping was applied using a bit of old sponge, first using a dark brown and then a silver, concentrating on the edges and areas that would be subject to the most wear. Finally (and as an experiment) I applied a bit of Modelmates engine oil around some of the grills and as vertical streaks on the side panels.  Final steps were to dull down the Quickshade using an all over spray of Testors Dullcote.

All in all I pretty pleased with the outcome. I haven’t really got a game lined up for this, but I imagine this might be appearing in a ‘moon Nazis’ scenario in 7TV as a centrepiece or objective.

I’ve still got a couple more vehicles to finish off from the Kickstarter and the troops I’ve got are ear marked for Imperial Guard proxies for Kill Team (not a game I have tried yet, but something my gaming group is starting to get into).

Revisiting Star Wars Legion

Earlier in the year I got really invested in Legion, the tabletop miniatures game in the Star Wars universe, published by Fantasy Flight Games. Having spent some time assembling and painting minis, I immediately got distracted (as all good hobby butterflys do) by terrain and re-utilising old toys for the tabletop.  A couple of vintage Kenner / Palitory AT-ATs were purchased from eBay (and then resold as I say sense), as were some Rebel Transports, a U-Wing and various other bits and pieces.

Then as often happens I just didn’t get to play the game.  I had a learning game with my good friend and gaming compadre, Mr.Hawkins, back in the Spring and then nothing.  This was partly due to the distraction of other shiny things, and partly because my best chance of getting a game was at my local club.  Due to other commitments I wasn’t able to get down and I missed most of the monthly meetings over the summer.

However this last Sunday I was finally able to Legion to the tabletop for a couple of games at Matlock and Dales WRG (at the request of another member who similarly had sat on the game for quite a while without actually playing).

I’m no good at reviews, but will say this (and have said so before); it’s a good game.  A very good game.  Bearing striking similarities to other Star Wars games in the Fantasy Flight catalogue (lots of tokens and cards, custom dice, the ‘surge’ mechanic), it seems to have ironed out some of the inconsistencies and clunkiness of games like Armada and Imperial Assault.  Adding to the mix an alternative unit activation mechanic and innovative and intuitive command and control element, this puts it above many similar games I have had experience of in the past. My opponent and I did get quite a few things wrong in the early rounds, but this wasn’t really noticed and didn’t interupt the cinematic flow of the game (I was making a lot of ‘pew pew’ sound effects in my head).

In getting ready for the game I wanted to just share a couple of hints and tips, both on the painting and army construction side of things.

While I had got at least a basecoat down on most of my miniatures (the contents of two core boxes and a handful of expansions), there were a few I had not yet touched.  It wouldn’t be realistic to get everthing done in time for the game (real life is quite hectic at the moment), but I at least wanted to be avoid playing with any completely unpainted models.

Therefore I concentrated on detailing up all the Imperial Stormtroopers I had previously undercoated white, adding in some basic detail and making them tabletop ready (with the intention of going back and finishing them off to a higher standard later).  Here, the humble toothpick was my friend.  Rather than rely on a brush and a steady hand to pick out the black details on helmets and armour and to minimise the chances of despoling that trademark white with any overbrushing I found toothpicks gave me the control and steadyness I needed (but maybe not the patience!).  This was particularly useful when doing helmet eye lenses and something I will try out for painting eyes in general moving forward.

legion 2
Small detail on the Stormtroopers applied using a toothpick. Note Revell TIE Fighter model kit as scenery (yes I know wrong era, but it does have working sound!)

My next job was to paint up the only fully unpainted squad I had not yet tackled, the Rebel Fleet Troopers.  These are the guys who valiantly get slaughtered by Darth Vader at the begining of the very first Star Wars film (and of course we now know this fight continued on from the end of Rogue One).  As figures go, I think these are some of the nicest that have been released so far.  Very characterful sculpts and true to the films.  I’d picked these guys up at UK Games Expo back in June, assembled them and then, well, got distracted…

Rebel Fleet Troopers (Star Wars)
While they didn’t do too well on screen, they were pretty rock solid on the tabletop!

Taking a very methodical approach I blocked out each colour (having applied a grey undercoat).  Following a production line approach of doing all of one colour across the squad before returning to the first and adding the next hue I was able to get these guys done in only a couple of hours.  I left the dark grey undercoat showing through for the mainly black coloured vests and let Army Painter washes do the rest.

The squad leader is based on Captain Antilles from the film and follows a different scheme.  The intention with these is that I will go back and do some proper basing and highlighting at a later date.

antilles
“If this is a consular ship, where is the ambassador?”

I have to say I’m not a huge fan of painting armies or even squads (I much prefer to do more individual character models): however the fact I was actually going to able to field these in a game was a real motivator.

The Rebel Fleet Troopers proved to be a really solid choice in play (and are my new favourites), having almost taken down Vader in the first game.  Some form of sweet revenge for their on screen performance perhaps?

Using Tabletop Admiral
Preparation and list building using Tabletop Admiral

I also just wanted to give a quick mention to the Tabletop Admiral online army building application for Legion.  I used this to quickly knock up the forces the night before the game allowing me to sort out cards, tokens and minis quickly beforehand and enabling us to setup quickly on the day.  If you are a player of Imperial Assault or Runewars this also might be of interest to you.

Sandstorm Palace
My next distraction – Star Wars style buildings in MDF. Please note that no Play Doh was required for construction!