New arrivals via the Space Bridge from Cybertron

I’ve recently finished off the remaining Wizkids Deep Cuts Transformers miniatures that have been sat half completed on my painting desk for a long while.

First up we have the Decepticon Soundwave. I’ve gone for a cartoon/comic colour scheme on these models, so primarily bold colours with some strident edge highlighting. This is not the way I usually paint but I think this is quite effective for these kinds of models.

Next up is Arcee. Introduced around the time of the Transformers movie in the mid-eighties Arcee was the first female Robot in Disguise. Of course because this was the eighties and she was a lady the colour scheme at the time was predominantly pink!

I’ve tried to replicate the original characters’ colour scheme on the mini and have again gone with some edge highlights to complete the look. As with all models in this range they came pre-undercoated in a Vallejo grey primer out of the box. An application of white contrast paint over that did me the job of panel lining and gave a good off-white colour for the main body.

In addition to the two miniatures I also recently finished off painting a ‘space bridge’ scenery piece that I 3D printed some time ago. Designed by ‘Doctor Merkury’, this is freely available for download from Thingiverse.

Finally here is a scale shot showing the two completed miniatures alongside an old pre-painted AT-43 figure. As you can see for 28mm (ish) scale gaming these could work quite well.

Star Wars 3D Printing – At the Court of Emperor Palpatine

The 3D printers have been running hot recently outputing a whole host of Star Wars miniatures. I am concentrating mainly on building an Imperial force at the moment and have turned my attention away from the troops to the top brass.

(I have, as usual, included links to where I have obtained these models, but to make things a bit clearer have also included a useful table at the end of the article summarising what came from where.)

First: the big boss man, Emperor Sheev Palpatine. This model complete with diorama base and guards is from the Patreon of Madox.

Not sure about the bare feet, but otherwise a lovely miniature to print and paint.

It is part of the welcome pack that becomes available when you sign up. The three figures were printed in resin on my AnyCubic Photon, with the base done in filament on my Creality CR-10S FDM printer.

The Royal Guard are highly stylised compared to their on screen counterparts (and the official Legion models). Not that pleased with the paint job on these, but the beauty of 3D printing is that I can just try again following a re-print.

Next up a model from Skull Forge Studios, which I actually purchased and painted a few months ago, but dug out again for this article. Sold as the ‘Authority Grand Duke’, this is my take on Grand Moff Tarkin.

Since I painted up the Grand Moff I have realised that his rank badge isn’t quite right, but hey ho, still looks the part).

Like my other Imperial officers this paint scheme was primarily based on a German Field Grey paint set I have from Andrea Color.

I’ve recently been getting my Star Wars fix, post -Mandalorian by binge watching (for the first time), the animated Rebels series on Disney+. I tried watching ‘The Clone Wars’ a few years ago and couldn’t get into it, but I absolutely loved Rebels. Two of the key Imperial villains in the last two series are Governor Pryce and Grand Admiral Thrawn.

Pryce is based on a female Imperial officer figure available from the Patreon of BigMillerBro, while I found the Thrawn miniature files free to download from Thingiverse.

Thrawn’s all white uniform was made slightly easier through the use of contrast paints. (Interesting the version of this model I downloaded from Thingiverse no longer appears to be on the site; however if you search for ‘Thrawn’ it looks like there are a few alternatives available.)

Next we have two of the Emperor’s advisors who appear briefly in Return of the Jedi. Like Thrawn these were free downloads from Thingiverse (designed by McAnultyMiniatures – well worth checking out – there are even Ewoks!).

Last but not least is the only model I have completed as part of this batch that is not 3D printed. The standing version of Palpatine is the actual Star Wars Legion model (albeit with the base swapped out for a 3D printed base I also purchased from the Madox Gumroad store).

MODELFILE AVAILABLE FROM
Emperor Palpatine Throne Room DioramaMadox 3D Design Patreon
Grand Moff TarkinSkull Forge Studios Gumroad store
Governor PryceBigMillerBro Patreon
Grand Admiral ThrawnThingiverse (free download) – no longer available.
Emperor’s AdvisorsThingiverse (free download)
Emperor PalpatineStar Wars Legion miniature by Fantasy Flight Games – available from you friendly local games store
Scenic basesMadox 3D Design Gumroad store