Action Force Motor Pool – work in progress

I’ve been doing this Action Force in 28mm thing for a few years now.  I keep getting distracted, but always get pulled back in.  I blogged recently about the ultimate goal of getting a Roboskull to the table, but this reminded me I have a number of part finished other vehicles to add to the motor pool.  So with a concerted effort I have gone back and revisited these.

Most of the vehicles I have previously started have been for the ‘Enemy’.  I’ve kind of handled this in a couple of different ways – both accurate replicas of the toys/comics and an ‘inspired by’  approach.

The latter has basically involved me finding models and toys (in the right scale) that kind of fit the setting.  For Action Force themselves this could be standard military type kit such as land rovers or tanks (concentrating on the eighties period), but for the Red Shadows I’ve thought a bit wider.  So this has led to some interesting choices and conversions.  Presented below are a couple of the more wild ideas I have completed, including a flying saucer and a ‘Dust 1947’ plane.

I’ve also recently gone down the ‘walker’/’mech’ route as well, utilising a Konflikt 47 resin/metal model kit from Warlord Games.  A head swap for the pilot and voila – the Red Spider!

Going further back to the German World War II inspiration for the Enemy, many years ago I picked up a Tamiya 1:48 scale Sdkfz.69. I’ve recently gone back and finished this, with the idea that this could represent the ubiquitous Shadowtrak.

And this brings me back to the other of the two top level options – accurate replicas of the toys in 28mm scale.  The obvious route to go down here is 3D printing – more about this later.  However there is at least one off the shelf option that is (relatively) widely available.

This is a novelty gift pack / toy by Running Press – the sort of thing you normally see for sale in stands next to checkouts in bookshops alongside Harry Potter wands or small TARDIS or Dalek models.  This particular item represents a Cobra HISS tank, better known to Action Force aficionados as the Enemy (and later Cobra) Hyena.  The scale is pretty much spot on for 28mm scale.

3D printed Hyena from Shapeways in the foreground, unpainted gift toy version at the back.  28mm scale Red Shadow for scale.

This is also sometimes available from third party sellers on Amazon, and that is where a few years ago I picked up half a dozen of these bad boys.  Out of the box it is coloured black and comes with a set of Cobra stickers to apply as well as an information booklet.  It also has sound!  Press a button on the turret and you get a slightly cartoony laser gun sound – totally unnecessary, but totally amazing.

I’ve painted these in a slightly different way than usually.  As the base model is black, I wanted the main body to be red, but also wanted to leave a lot of the detail untouched (including the clear canopy in case I ever wanted to add a driver); I’ve gone down the Gundam marker route…..

Gundam markers are named for and used almost exclusively in the Gunpla (Gundam kit building) community.  They come in various types ranging from large nibbed pens that apply enamel paint on application of pressure to fine tipped markers which are used for panel lining.  I’ve found these to be an interesting addition to my hobby toolkit.

For the Hyena I used a thick nibbed paint pen to apply a base coat of red (leaving some of the recesses black where appropriate).  Once dry (which takes a while longer for enamels) I drybrushed a light red acrylic over this to apply both a highlight and to dull down the shininess of the enamel base coat.  The markings were applied with a thinner nibbed marker.

So, the elephant in the room then?  Yes 3D printing.  I still covet a printer of my own, but in the meantime and for those like me bereft of the hardware there are still plenty of options.  There are a surprising number of 3D models of GI Joe vehicles out there (just search on Shapeways or Thingiverse).  I have in the past both ordered a printed model from the former, but more recently have been able to get some files printed out by a friend.

Currently on my workbench are these two beauties – a Red Shadows Laser Exterminator (aka a GI Joe HAL) and an SAS Panther jeep (aka a Cobra Stinger).  I’m going to do a detailed prep, build and painting guide on these in a future blog.

Where things are a little lacking in availability of 3D models on line is in those Action Force vehicles that weren’t based on existing GI Joe toys back in the day.  What that does mean is that there is in particular a big Shadowtrak and Roboskull shaped hole in the Baron’s armoury.

Talking of the Roboskull…..

Action Force in 28mm – Space Force Mobile Command

Many years before Space Force was a real actual thing (maybe), they were the eyes and ears of Action Force monitoring the skies and protecting the Earth from afar from the evil machinations of Ironblood.

 

Along with Q Force (the underwater team), I think it is fair to say that they were not quite as popular as their ground based infantry comrades in Z Force and the SAS.  Part of it was down to the more limited range of toys available and the fact that they didn’t feature as much as other teams in the comic strips.

 

In fact the overt sci-fi stylings of Space Force did seem to clash a bit with the modern militaristic feel of the rest of the range.  It was not actually towards the end of this era of Action Force toys that the Red Shadows had anything ‘space-related’ to field against them, with the awesome Roboskull.

A couple of years ago I picked up the excellent ‘not Space Force’ miniatures from the Woodbine Design Company (part of Gripping Beast) and as part of this very long running project have just started to think about vehicles and transport for them.

Rather than go down the ‘spaceship’ route I’ve tried to mix the militaristic with near future sci-fi and have started to paint up a vintage IMAI model kit of the Shado Mobile from Gerry Anderson’s UFO.

Initially undercoated using an Army Painter Wolf Grey spray can.  I have so far gone through and added some additional darker blue to match the general livery of Space Force vehicles from the toy range; as well as blocking out colour on the tracks and wheels.

The ‘Action Force’ logo sticker is from a reproduction set scaled for the toys.  Next step will be adding some Space Force logos (which I will freehand) and some weathering.  My target game system for this is of course 7TV!